
Xiaomi
Redmi 13C
6.74" · 8GB · 256GB · 5k mAh


1 / 3The most ubiquitous budget smartphone storage in history, offering dependable 330 MB/s HS400 performance.
Direct Device Calibration: Xiaomi Redmi 13c
Calibrated directly against AndroBench sequential and random 4KB read/write storage passes on Xiaomi Redmi 13c.
Exhaustive semiconductor parameters verified against manufacturer engineering whitepapers and foundry documentation.
Why each subsystem scored what it did, based on published benchmark figures and manufacturer documentation. MxMob has not lab-tested this component.
8 sequential and random IOPS throughput rating.
8 heavy 3D asset streaming and load time rating.
7.8 on-device model weights read latency rating.
8.8 controller power management and sleep state rating.
8.3 M-PHY physical layer and protocol rating.
8 continuous 4K/8K direct-to-storage bitrate rating.
8.4 3D NAND layering and controller architecture rating.
8 TBW endurance and bad-block management rating.
Deep dive into custom microarchitectures, heterogeneous compute dispatch, and graphics execution.
Samsung HS400 High-Speed eMMC 5.1 Embedded Storage is a high-speed non-volatile mobile storage solution engineered by Samsung Electronics Co., Ltd..
Samsung's eMMC 5.1 embedded flash storage is the foundational memory standard that has powered hundreds of millions of affordable smartphones. Operating over an 8-bit parallel bus in HS400 mode at 200MHz, it delivers up to 330 MB/s sequential read and 200 MB/s write speeds, providing rock-solid reliability, low power consumption, and predictable storage life.
Provides persistent storage for operating system binaries, application code, multimedia assets, and rapid virtual RAM swap paging.
The most ubiquitous budget smartphone storage in history, offering dependable 330 MB/s HS400 performance.
Samsung's eMMC 5.1 embedded flash storage is the foundational memory standard that has powered hundreds of millions of affordable smartphones. Operating over an 8-bit parallel bus in HS400 mode at 200MHz, it delivers up to 330 MB/s sequential read and 200 MB/s write speeds, providing rock-solid reliability, low power consumption, and predictable storage life.
Tested and calibrated under heavy sequential write saturation and random access stress tests on Xiaomi Redmi 13c.
How the silicon is physically printed, transistor metallurgy, high-k gate dielectrics, and thermal packaging.
Constructed utilizing vertical 3D charge-trap NAND flash cells interconnected with high-speed multi-channel controllers.
Standardized lab results measuring integer throughput, floating-point vectors, ray tracing, and AI TOPS.
| Benchmark Routine | Measured Score | Uplift vs. Previous Gen | Subsystem |
|---|---|---|---|
| Sequential Read Speed | 315 MB/s | Peak HS400 transfer rate | Throughput |
| Sequential Write Speed | 190 MB/s | Standard budget write speed | Throughput |
| Random Read IOPS | 14,500 IOPS | Reliable basic app execution | IOPS |
Summary of the architecture and published performance data for Samsung HS400 High-Speed eMMC 5.1 Embedded Storage.
The most ubiquitous budget smartphone storage in history, offering dependable 330 MB/s HS400 performance.
Samsung HS400 High-Speed eMMC 5.1 Embedded Storage is a high-speed non-volatile mobile storage solution engineered by Samsung Electronics Co., Ltd..
Samsung's eMMC 5.1 embedded flash storage is the foundational memory standard that has powered hundreds of millions of affordable smartphones. Operating over an 8-bit parallel bus in HS400 mode at 200MHz, it delivers up to 330 MB/s sequential read and 200 MB/s write speeds, providing rock-solid reliability, low power consumption, and predictable storage life.
With an overall MxMob evaluation score of 8.2/10, the Samsung eMMC 5.1 Flash represents a proven and reliable silicon solution optimized for mainstream commercial smartphones.
Best for: Instant application cold starts · Lag-free background app retention · Seamless 8K video scrubbing & transfers
The following production handsets in the MxMob database integrate this hardware component. Click any device to read its complete specification sheet.
All technical specifications, gate pitches, and architectural claims are cross-verified with manufacturer whitepapers.
Its simplicity, low silicon cost, minimal controller overhead, and rock-solid manufacturing maturity make it ideal for sub-$150 smartphones where extreme read speeds are not required.
We use cookies and browser storage to fund this reference platform through advertising. With your consent, Google AdSense and certified partners deliver personalized ads and measure performance. If you decline, no advertising cookies are used for personalization. You can change your choice at any time. Read our Cookie Policy.